Badged Holden Cruze in Australasia and Daewoo Lacetti Premiere (from 2008 to 2011) in South Korea, the new generation model does not serve as a replacement for its identically badged predecessor, but rather replaces the Chevrolet Cobalt and Daewoo Lacetti compact sedans. GM phased out production of the Chevrolet Cobalt and its badged engineered counterpart, the Pontiac G5 in 2010, on the introduction of the Chevrolet Cruze in North America.
pics of 2011 Chevy Cruze
Chevrolet Cruze 2011
Announced as the Chevrolet YGM1 concept car at the Tokyo Motor Show in 1999, the original Cruze was derived from the subcompact Suzuki Ignis (known as the Suzuki Swift in Japan). The development of the Cruze departed from the original five-door hatchback Suzuki as a sport utility vehicle (SUV), using either the front- or all-wheel drive layout. Despite the Chevrolet branding, the YGM1, like the production car, was the work of GM's Australian arm, Holden. Along with the styling, Holden also executed most of the engineering work and were responsible for devising the "Cruze" nameplate.
2011 Chevrolet Cruze Safety
GM revealed the production Chevrolet Cruze in October 2001, with Japanese sales commencing the following month. Manufactured by Suzuki in Japan, the Cruze was also sold in Australasia from 2002 through to 2006 as the Holden Cruze. From 2003, Suzuki of Europe began manufacturing the Cruze as the Suzuki Ignis—representing a facelift of the original Ignis.
2011 New Chevrolet Cruze
GM in 2008 introduced the Cruze compact car, carrying the "J300" internal designation. This J300 iteration serves as a replacement for the Chevrolet Cobalt and Daewoo Lacetti—both unrelated cars. The first renderings of the Cruze were revealed by GM at a press conference on July 15, 2008, with the first official images released on August 21, 2008.
2011 Chevy Cruze Interior
Chevrolet Cruze 2011
Cruze production sites include Gunsan, Jeonbuk, South Korea;, Saint Petersburg, Russia; Shenyang, China; and Halol, India; Hanoi, Vietnam since April 2010 in complete knock-down (CKD) form, Ust-Kamenogorsk, Kazakhstan from May 2010; Rayong, Thailand after December 2010, and São Caetano do Sul, Brazil from 2011. Holden's localized hatchback version of the Cruze to be built at the Elizabeth, South Australia factory from late 2011 will join the Cruze sedan manufactured there since March 2011. GM in the United States has upgraded the existing plant in Lordstown, Ohio to manufacture the Cruze, investing more than US$350 million. At the ceremony of the start of production of Cruze at Ohio, Mark Reuss, the president of GM's North American operations said, "This is everything for us". It is described as GM's most significant new vehicle introduction into North America since the Chapter 11 reorganization in 2009, and is GM's latest attempt to build a small size car that North American consumers would "buy because they like it — not simply because it is cheap".
2011 Chevrolet Cruze Front End
2011 Chevy 2011 Chevy Prices
2011 Chevrolet Cruze RS
Underpinned by the front-wheel drive GM Delta II platform, GM has confirmed the Cruze development program occurred under a global design and engineering team. Most of the design work was conducted by GM Daewoo (now GM Korea), with GM's Opel division responsible for most of the engineering. This development program spanned over 27 months at a cost of US$4 billion. A total of 221 prototypes were tested in Australia, Canada, China, South Korea, Sweden, the United Kingdom and the United States.
2011 Chevrolet Cruze
2011-Chevrolet-cruze-interior
According to GM, the Cruze's body structure is 65 percent high-strength steel. MacPherson struts are utilized in the front suspension with a solid torsion beam axle for the rear, avoiding the cost and complexity needed for a modern multi-link independent rear suspension used by some more expensive rivals.
chevrolet-cruze-2011-img_8
2011 Chevrolet Cruze Picture
2011 Chevy Cruze - Coming
2011 Chevrolet Cruze
2011 Chevrolet Cruze Front
pics of 2011 Chevy Cruze
Chevrolet Cruze 2011
Announced as the Chevrolet YGM1 concept car at the Tokyo Motor Show in 1999, the original Cruze was derived from the subcompact Suzuki Ignis (known as the Suzuki Swift in Japan). The development of the Cruze departed from the original five-door hatchback Suzuki as a sport utility vehicle (SUV), using either the front- or all-wheel drive layout. Despite the Chevrolet branding, the YGM1, like the production car, was the work of GM's Australian arm, Holden. Along with the styling, Holden also executed most of the engineering work and were responsible for devising the "Cruze" nameplate.
2011 Chevrolet Cruze Safety
GM revealed the production Chevrolet Cruze in October 2001, with Japanese sales commencing the following month. Manufactured by Suzuki in Japan, the Cruze was also sold in Australasia from 2002 through to 2006 as the Holden Cruze. From 2003, Suzuki of Europe began manufacturing the Cruze as the Suzuki Ignis—representing a facelift of the original Ignis.
2011 New Chevrolet Cruze
GM in 2008 introduced the Cruze compact car, carrying the "J300" internal designation. This J300 iteration serves as a replacement for the Chevrolet Cobalt and Daewoo Lacetti—both unrelated cars. The first renderings of the Cruze were revealed by GM at a press conference on July 15, 2008, with the first official images released on August 21, 2008.
2011 Chevy Cruze Interior
Chevrolet Cruze 2011
Cruze production sites include Gunsan, Jeonbuk, South Korea;, Saint Petersburg, Russia; Shenyang, China; and Halol, India; Hanoi, Vietnam since April 2010 in complete knock-down (CKD) form, Ust-Kamenogorsk, Kazakhstan from May 2010; Rayong, Thailand after December 2010, and São Caetano do Sul, Brazil from 2011. Holden's localized hatchback version of the Cruze to be built at the Elizabeth, South Australia factory from late 2011 will join the Cruze sedan manufactured there since March 2011. GM in the United States has upgraded the existing plant in Lordstown, Ohio to manufacture the Cruze, investing more than US$350 million. At the ceremony of the start of production of Cruze at Ohio, Mark Reuss, the president of GM's North American operations said, "This is everything for us". It is described as GM's most significant new vehicle introduction into North America since the Chapter 11 reorganization in 2009, and is GM's latest attempt to build a small size car that North American consumers would "buy because they like it — not simply because it is cheap".
2011 Chevrolet Cruze Front End
2011 Chevy 2011 Chevy Prices
2011 Chevrolet Cruze RS
Underpinned by the front-wheel drive GM Delta II platform, GM has confirmed the Cruze development program occurred under a global design and engineering team. Most of the design work was conducted by GM Daewoo (now GM Korea), with GM's Opel division responsible for most of the engineering. This development program spanned over 27 months at a cost of US$4 billion. A total of 221 prototypes were tested in Australia, Canada, China, South Korea, Sweden, the United Kingdom and the United States.
2011 Chevrolet Cruze
2011-Chevrolet-cruze-interior
According to GM, the Cruze's body structure is 65 percent high-strength steel. MacPherson struts are utilized in the front suspension with a solid torsion beam axle for the rear, avoiding the cost and complexity needed for a modern multi-link independent rear suspension used by some more expensive rivals.
chevrolet-cruze-2011-img_8
2011 Chevrolet Cruze Picture
2011 Chevy Cruze - Coming
2011 Chevrolet Cruze
2011 Chevrolet Cruze Front
No comments:
Post a Comment